How to use Household adult and child Atomizer correctly?

Author: Lily    Time:2021/1112
Baili Medical Suppliers(Xiamen) Co., is a professional medical devices supplier based in Xiamen, China. Our main products: Protective Equipment, Hospital Equipment, First Aid Equipment, Hospital and Ward Facilities.
How to use Household adult and child Atomizer : Preparations 
Put the atomizer on a clean table or table, plug it into the prepared connection atomizer and the power adapter, and connect the machine.
How to use Household adult and child Atomizer: Put in the medicine. Unscrew the neutralizer cup and put in the prepared medicine. 
The following steps should be followed for drug placement: 
1. For pre-mixed drugs: open the neutralizer cup, put the drugs in it, and then connect the neutralizer cup to the nebulizer cover, and the oxygen tube to the neutralizer cup. 2. Put in the medicine that needs you to mix: A:. Use a syringe to inhale the medicine according to the medicine dose that the doctor tells you. Make sure to expel all air bubbles. B:. Pour the medicine into the atomizing cup. You can inject more than one type of medicine into the neutralizer cup. For example, you can mix Portico and Tintoretto and give both types of medicine to your child at the same time. C: Then connect the atomization cup and the atomization cover.
 Note: A proper amount of liquid medicine should be put into the atomization cup, generally 2~7ml (do not exceed 8ml). Because there is too little liquid medicine, the liquid medicine cannot be sucked up, nor can it be atomized. Too much liquid medicine will cause the atomized part of the liquid medicine to be covered by the liquid medicine, and thus cannot be atomized.
How to use Household adult and child Atomizer:start atomization 
1.Use a face mask to tightly cover the nose and mouth of the person who needs to atomize. If it is a child, do not leave the pacifier in the child's mouth. If you are using an interface tube, place the interface tube between the upper and lower teeth and wrap the interface tube tightly with your lips.
2. Turn on the compressor. A mist of medicine will be released through the mask compressor. 

3. Breathe slowly through your mouth. After every 3 or 4 breaths, take a deep breath. 

4. When the mask or mouthpiece no longer emits mist, tap the spray chamber 3 or 4 times to see if there is any excess mist. When no mist is released after tapping the atomization chamber, it means that all the medicine has been used. 

5. Keep the mask on the face until no mist is released, then remove the mask on the nose and mouth, or take out the mouthpiece from the mouth, and turn off the compressor