How to use Toilet Chair

Author: Lily    Time:2022/1/17
Baili Medical Suppliers(Xiamen) Co., is a professional medical devices supplier based in Xiamen, China. Our main products: Protective Equipment, Hospital Equipment, First Aid Equipment, Hospital and Ward Facilities.
With the continuous change of people's demand for toilets, there are many types of Toilet Chair in the bathroom market. 
1. Toggle the separation switch in the middle of the back of the Toilet Chair to divide the Toilet Chair  into two parts, the upper part is the clean water tank and the lower part is the dirt tank.
2. Pull apart the isolation plate of the dirt inlet and add a certain dose of degrading agent. For 21 liters of dirt, add 50-120 ml of degrading agent, and add 100 ml of clean water at the same time, and then close the isolation plate.
3. Put the clean water tank in its original position (connected with the dirt tank), open the water filling port of the clean water tank, fill it with clean water, and then tighten the cover.
4. When excreting, please open the isolation board of the dirt box, and the excrement will fall into the dirt box. After use, press the water pump by hand, and the Toilet Chair  can be flushed with clean water. Push back the dirt box isolation plate and prepare for the next use.
5. After the dirt box is full, separate the toilet according to the separation steps (the isolation plate needs to be pushed tightly). Raise the waste bin to the toilet or other location. Turn the sewage pipe to the spout, open the cover, tilt the dirt box, and press the air pressure reducing valve at the same time, the sewage will flow out slowly.
6. After the dumping is completed, the dirt box needs to be rinsed with clean water, and an appropriate amount of degrading agent is added according to the "additive" step, and then it can be reused.