How to Use Medical Adhesive Tape
2021-09-29
How to use Medical Adhesive Tape
The medical tape is soft and breathable, easy to use and quick to use, with a small amount, does not slip off, and does not affect blood circulation.
1. Use cotton sleeves or cotton rolls on the dressing area as a liner, and more cotton sleeves or cotton rolls can be used in places that need to increase pressure or thin and bony.
2. Please wear protective gloves.
3. Open the package before use, place the polymer (orthopedic synthetic) bandage in room temperature (68-77°F, 20-25°C) water for 1-2 seconds, gently squeeze the bandage to remove excess water. {Polymer (orthopedic synthesis) bandage curing speed is proportional to the immersion time of the bandage and the immersion water temperature: if a longer operation is required, please use it directly without immersion}
4. Spiral winding as required. Each circle overlaps 1/2 or 1/3 of the width of the bandage, wrap it tightly but do not use too much force, the shaping is completed at this time, and the polymer (orthopedic synthetic) bandage is cured for 30 seconds and needs to be static (that is, to ensure the shape of the shaping surface. Do not move); 3-4 layers are sufficient for non-load-bearing parts. The load-bearing parts can be wrapped with 4-5 layers of polymer (orthopedic synthetic) bandages. When winding, the bandages are smoothed and smooth, so that each layer is better. For the support and adhesion, you can smooth the bandage after dipping your gloves in water to achieve better results.
5. The curing and forming time of polymer (orthopedic synthetic) bandage is about 3-5 minutes (depending on the immersion time and immersion temperature of the bandage). You can feel the support after 20 minutes.
The medical tape is soft and breathable, easy to use and quick to use, with a small amount, does not slip off, and does not affect blood circulation.
1. Use cotton sleeves or cotton rolls on the dressing area as a liner, and more cotton sleeves or cotton rolls can be used in places that need to increase pressure or thin and bony.
2. Please wear protective gloves.
3. Open the package before use, place the polymer (orthopedic synthetic) bandage in room temperature (68-77°F, 20-25°C) water for 1-2 seconds, gently squeeze the bandage to remove excess water. {Polymer (orthopedic synthesis) bandage curing speed is proportional to the immersion time of the bandage and the immersion water temperature: if a longer operation is required, please use it directly without immersion}
4. Spiral winding as required. Each circle overlaps 1/2 or 1/3 of the width of the bandage, wrap it tightly but do not use too much force, the shaping is completed at this time, and the polymer (orthopedic synthetic) bandage is cured for 30 seconds and needs to be static (that is, to ensure the shape of the shaping surface. Do not move); 3-4 layers are sufficient for non-load-bearing parts. The load-bearing parts can be wrapped with 4-5 layers of polymer (orthopedic synthetic) bandages. When winding, the bandages are smoothed and smooth, so that each layer is better. For the support and adhesion, you can smooth the bandage after dipping your gloves in water to achieve better results.
5. The curing and forming time of polymer (orthopedic synthetic) bandage is about 3-5 minutes (depending on the immersion time and immersion temperature of the bandage). You can feel the support after 20 minutes.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy